ここでchecking for iconv.h... noが出ているとmakeが途中で止まる
私の場合は、/usr/Include はパスが通っているがiconv.hのある/usr/local/Include には通っていなかったので
# ln -s /usr/local/Include/iconv.h /usr/Include/iconv.h
でいけました。
# gmake
# gmake -f GNUmakefile.apache install
これでインストール完了
次にhttpd.confの書き換え
インストールしたディレクトリにアクセス許可
配布のところに書いてある設定ファイルを参考に自分の環境に合わせて書き換える。
あとは
# /usr/local/etc/rc.d/apache22 restart
で再起動をかけてアクセスして動作を確認
# vi /usr/share/examples/cvsup/refuse doc/ja_*とports/japaneseを削除 # cvsup -g -L 2 -h cvsup8.freebsd.org -z /usr/share/examples/cvsup/ports-supfile # portsdb -Uu
これで使えるようになりました。
SSHの設定
公開鍵認証のみパスワード認証は使いません。
公開鍵の作成
# ssh-keygen -t rsa
# cd ~/.ssh
# mv id_rsa.pub authorized_keys
# chmod 600 authorized_keys
秘密鍵のほうは接続元に渡したら消しましょう
# rm id_rsa
sshd_configの編集
# vi /etc/ssh/sshd_config
RSAAuthentication yes
PubkeyAuthentication yes
AuthorizedKeyFile .ssh/authorized_keys
PermitRootLogin no
RhostsRSAAuthentication no
PasswordAuthentication no
PermitEmptyPasswords no
ChallengeResponseAuthentication no
# /etc/rc.d/sshd restart]]>
ソースの同期
# cvsup -g -L 2 -h cvsup6.freebsd.org -z /usr/share/examples/cvsup/standard-supfile
カスタムカーネルの構築
# cd /usr/src/sys/i386/conf/
# cp GENERIC hpkernel
# vi HPKERNEL
要らなさそうなものを片っ端からコメントアウト
IPFilterは使うので追記
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.429.2.14.2.1 2007/12/15 06:32:32 scottl Exp $
machine i386
#cpu I486_CPU
#cpu I586_CPU
cpu I686_CPU
ident hpkernel
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
options SCHED_4BSD # 4BSD scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
#options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options MD_ROOT # MD is a potential root device
#options NFSCLIENT # Network Filesystem Client
#options NFSSERVER # Network Filesystem Server
#options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options ADAPTIVE_GIANT # Giant mutex is adaptive.
# IPFilter
options IPFILTER
options IPFILTER_LOG
options IPFILTER_DEFAULT_BLOCK
device apic # I/O APIC
# Bus support.
#device eisa
device pci
# Floppy drives
#device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
#device ahd # AHA39320/29320 and onboard AIC79xx devices
#options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
#device amd # AMD 53C974 (Tekram DC-390(T))
#device isp # Qlogic family
##device ispfw # Firmware for QLogic HBAs- normally a module
#device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
#device trm # Tekram DC395U/UW/F DC315U adapters
#device adv # Advansys SCSI adapters
#device adw # Advansys wide SCSI adapters
#device aha # Adaptec 154x SCSI adapters
#device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device bt # Buslogic/Mylex MultiMaster SCSI adapters
#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
#device ch # SCSI media changers
device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
#device pass # Passthrough device (direct SCSI access)
#device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers interfaced to the SCSI subsystem
#device amr # AMI MegaRAID
#device arcmsr # Areca SATA II RAID
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device ciss # Compaq Smart RAID 5*
#device dpt # DPT Smartcache III, IV - See NOTES for options
#device hptmv # Highpoint RocketRAID 182x
#device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
#device rr232x # Highpoint RocketRAID 232x
#device iir # Intel Integrated RAID
#device ips # IBM (Adaptec) ServeRAID
#device mly # Mylex AcceleRAID/eXtremeRAID
#device twa # 3ware 9000 series PATA/SATA RAID
# RAID controllers
#device aac # Adaptec FSA RAID
#device aacp # SCSI passthrough for aac (requires CAM)
#device ida # Compaq Smart RAID
#device mfi # LSI MegaRAID SAS
#device mlx # Mylex DAC960 family
#device pst # Promise Supertrak SX6000
#device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
#device psm # PS/2 mouse
device kbdmux # keyboard multiplexer
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
device agp # support several AGP chipsets
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device cbb # cardbus (yenta) bridge
#device pccard # PC Card (16-bit) bus
#device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device puc
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device em # Intel PRO/1000 adapter Gigabit Ethernet Card
#device ixgb # Intel PRO/10GbE Ethernet Card
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
#device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
#device bfe # Broadcom BCM440x 10/100 Ethernet
#device bge # Broadcom BCM570xx Gigabit Ethernet
#device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device lge # Level 1 LXT1001 gigabit Ethernet
#device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
#device nge # NatSemi DP83820 gigabit Ethernet
#device nve # nVidia nForce MCP on-board Ethernet Networking
#device pcn # AMD Am79C97x PCI 10/100(precedence over 'lnc')
#device re # RealTek 8139C+/8169/8169S/8110S
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device stge # Sundance/Tamarack TC9021 gigabit Ethernet
#device ti # Alteon Networks Tigon I/II gigabit Ethernet
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vge # VIA VT612x gigabit Ethernet
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs. pccard NICs included.
#device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
device ex # Intel EtherExpress Pro/10 and Pro/10+
#device ep # Etherlink III based cards
#device fe # Fujitsu MB8696x based cards
#device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device lnc # NE2100, NE32-VL Lance Ethernet cards
#device sn # SMC's 9000 series of Ethernet chips
#device xe # Xircom pccard Ethernet
# Wireless NIC cards
#device wlan # 802.11 support
#device wlan_wep # 802.11 WEP support
#device wlan_ccmp # 802.11 CCMP support
#device wlan_tkip # 802.11 TKIP support
#device an # Aironet 4500/4800 802.11 wireless NICs.
#device ath # Atheros pci/cardbus NIC's
#device ath_hal # Atheros HAL (Hardware Access Layer)
#device ath_rate_sample # SampleRate tx rate control for ath
#device awi # BayStack 660 and others
#device ral # Ralink Technology RT2500 wireless NICs.
#device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
#device sl # Kernel SLIP
#device ppp # Kernel PPP
#device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
#device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
#device ums # Mouse
#device ural # Ralink Technology RT2500USB wireless NICs
#device urio # Diamond Rio 500 MP3 player
#device uscanner # Scanners
# USB Ethernet, requires miibus
#device aue # ADMtek USB Ethernet
#device axe # ASIX Electronics USB Ethernet
#device cdce # Generic USB over Ethernet
#device cue # CATC USB Ethernet
#device kue # Kawasaki LSI USB Ethernet
#device rue # RealTek RTL8150 USB Ethernet
# FireWire support
#device firewire # FireWire bus code
#device sbp # SCSI over FireWire (Requires scbus and da)
#device fwe # Ethernet over FireWire (non-standard!)
make.confを編集
# vi /etc/make.conf
CPUTYPE=i686
CFLAGS= -O -pipe
COPTFLAGS= -O -pipe
USA_RESIDENT=NO
KERNCONF=hpkernel
NO_PROFILE=true
ソースのコンパイル
# cd /usr/src
# make -j2 buildworld
カーネルのバックアップ
# mkdir /boot/GENERIC.BAK
# cd /boot
# tar -cvf /var/tmp/GENERIC.tar ./kernel
# cd /boot/GENERIC.BAK
# tar -xvf /var/tmp/GENERIC.tar
# rm /var/tmp/GENERIC.tar
カーネルのコンパイル
# cd /usr/src
# make buildkernel
カーネルのインストール
# make installkernel
再起動
# sync;sync;sync
# shutdown -r now
システムのインストール
# cd /usr/src
# make installworld
etcの更新
# cp -Rp /etc /etc.bak
めんどくさいので
/usr/sbin/mergemaster -a -i
再起動
# shutdown -r now
# uname -a
で更新されていることを確認
WebGUI使えるのは楽でいいですね。
RAIDも簡単に組めました。
http://www.freenas.org/index.php?option=com_openwiki&Itemid=30&id=sug:jp
LinuxベースのNasサーバもあるみたいです。
]]>簡単に使えるっぽいので今度試してみよう
]]>setupのプログラムで、二か所だけ、コメント化することで、セットアップが動作し、
動作するようになります。
１ 基本的には、CGIが正常に動作する環境
２ セットアップが実行され、エラーが表示された箇所 ファイルの権限系 そこの関数の戻り値を制御する。
これだけです。
あとは、動作します。
これはテスト書き込みです。
]]># ps aux | grep opennap
で起動していることを確認。
参考
OpenNap-NG Reference Manual
BBR-4MGの管理画面より出来上がったファームウェアを使ってアップデート
参考
BBR-4HG http://buffalo.melcoinc.co.jp/products/catalog/item/b/bbr-4hg/index.html
BBR-4MG http://buffalo.jp/products/catalog/item/b/bbr-4mg/index.html
バイナリエディタ Bz http://www.zob.ne.jp/~c.mos/soft/bz.html
]]>
http://nanabit.net/softwares/python/dlnico/
nicovine
]]>2007/09/19 ファイルの場所が変わっていたので修正
]]> わっふる for PSPxkazoku for PSP Lite 20050819exp
http://ruliweb2.empas.com/ruliboard/file/util_psp/157.zip
あかね for PSP Lite
http://ruliweb2.empas.com/ruliboard/file/util_psp/824AKANE.zip
使い方
PSP-君でもできること[xkazoku for PSPで君も『家族計画』!!]
http://izuno.blog22.fc2.com/blog-entry-32.html
PSP-君でもできること[AIRで残暑を楽しもう!!]
http://izuno.blog22.fc2.com/blog-entry-2.html
P.S.PSP[あかね for PSP Lite]
http://ameblo.jp/pspsp/entry-10003336170.html
Pandora's Battery
http://dl.qj.net/Pandora-s-Battery-PSP-Homebrew-Applications/pg/12/fid/14362/catid/151
システムアップデータ(V1.50)
正規バッテリー
メモリースティックPRODUO(256M以上)
PSP本体(V1.50 or CFW)
パンドラバッテリーの作り方
注意:PSPのドライブレターをPとして書きます。
1.メモリースティックPRODUOをPSPでフォーマットする
2.14362_pandora.zipを解凍し「14362_pandora/mspformat/mspformat.exe」をCドライブに移動する
3.コマンドプロンプトを起動し
C:\Documents and Settings\ユーザー名>cd c:\
C:\>mspformat.exe P
You are about to format the drive P
All data will be lost. Do you want to continue? [Y]y
Drive succesfully formatted, and partition moved.
4.「ms0:/PSP/GAME/」に「14362_pandora/installer/」と「14362_pandora/battery/」の中にあるフォルダを入れる
5.システムアップデータ(V1.50) 『EBOOT.PBP』を『UPDATE.PBP』とリネームして「ms0:/」に入れる
6.PSPでPandora's Battery Firm.Installerを起動
7.画面が変わったら×ボタンを押す
8.msipl.binが「ms0:/」に製作されたら自動で終了する
9.「14362_pandora/mspformat/msinst.exe」にある「msinst.exe」をCドライブに移動する
10.コマンドプロンプトで起動する
C:\Documents and Settings\ユーザー名>cd c:\
C:\>msinst.exe P P:\msipl.bin
Are You Sure ?[Y]y
Write MS BOOT CODE
11.PSPでPandora's Battery Createrを起動
12.画面が変わったら、△ボタンでEEPROMをメモステにバックアップした後再び起動して、×ボタンでバッテリーのEEPROMを書き換える
13.完了すると自動で終了する
追記
Pandora's Box Easier-Installer
http://dl.qj.net/General-Tools-Utilities/pg/12/fid/14414/catid/193
こちらを使うと簡単にできます。
パンドラバッテリーの使いかた
1.ACアダプタの刺さっていないPSPに起動用メモリースティックとパンドラバッテリーを装着
2.パンドラバッテリーを装着すると電源が付きPandora's Battery Recovery Menuが起動する
3.画面が変わったら、×ボタンでダウングレーダーを起動し×ボタンでダウングレードを開始
4.ダウングレードが終了したら再起動する
5.電源を入れて起動すればダウングレード成功
パンドラバッテリーを通常に戻す方法
1.バッテリーを外した状態でACアダプタをさして、PSPを起動しパンドラバッテリーを装着する。
2.Pandra's Battery Creatorを起動
3.L+Rボタンで通常に戻る